TEN-MINUTE MOBILIZATION SYSTEM

Speedbox... is engineered to take the misery out of mobilization, optimized for 463-L pallet fit, made to be the envy of every loadmaster, built to withstand the toughest deployment, and ready to go when you are. It’s fast. It’s easy. Load out in less than ten minutes.

THE CHALLENGE

THE CHALLENGE

Let’s face it, palletizing and getting your kit airborne and to safety is miserable work. Packing heavy and expensive weapons, mounts, batteries, ammo, radios, etc. into bins and boxes made for nonspecific civilian applications and stacking them on a 463-L pallet is inefficient, unstable, and risks that ill-fated Loadmaster command, “Repack!” And once you’re there, unloading and getting it where you need it quickly is awkward and labor-intensive at best. There’s got to be a better way!

THE SOLUTION

THE SOLUTION

Speedbox—the ten-minute mobilization system. Our rugged, roto-molded containers are lightweight, lockable, wind and waterproof, buoyant, shatter resistant, and stronger than most metals. Each capable of holding 300 lbs., Speedboxes stack and interlock to maximize secure space on a 463-L pallet. On the ground, users extend the handle to roll one Speedbox in each hand, on heavy-duty, no-flat, off-road wheel/tire assemblies. Speedbox takes the pain out of palletizing.

Features

  • Big and Sturdy

    Big and Sturdy

    Speedbox is a roto-molded polymer container with integral lid that is shatter resistant and stronger than most metals. There’s not a better material to protect your kit. Each single-wall Speedbox weighs 50 lbs. and provides 13.8 cubic feet of space to hold up to 300 lbs.

  • Stackable and Interlocking System

    Stackable and Interlocking System

    Designed and constructed to work modularly, each Speedbox nests with the one above, below and next to it, creating a perfectly maximized, loaded-out 463-L pallet and guaranteeing a first-time “go” flight inspection. Stabilizing tethers of 3/8-inch rope are standard on each Speedbox and make interlocking quick and easy.

  • No-Flat, Off-Road Tires

    No-Flat, Off-Road Tires

    Ten-inch polyurethane tires eliminate any chance of a flat tire, because they are solid material—no air inside. Their size and tread ensure performance from any drop zone or HLZ and heavy-duty ball bearings with grease fittings on a 5/8-inch axle support a 300 lb. load. The best tire to get your stuff where it needs to go!

  • Never-Fail Handle System

    Never-Fail Handle System

    The heavy-duty, fixed handle rotates to an ergonomically efficient grip and angle for optimal leverage in pulling one Speedbox in each hand. The never-fail handle system is made of two solid 3/4-inch aluminum rods, a 2-lb. solid aluminum locking block, and an angle iron to reinforce the major stress point.

  • T-Handle Keyed Lock

    T-Handle Keyed Lock

    Security is built into every Speedbox by way of a die-cast T-handle keyed lock. The cam-style mechanism is compact and one of the most secure solutions in the industry.

  • Water-tight, Air-tight Protection with Drain

    Water-tight, Air-tight Protection with Drain

    Speedbox has a built-in gasket around the top wall creating an airtight and watertight seal. A simple air/water bleed valve, which doubles as a drain, is cast into the bottom to equalize the atmospheric conditions inside and out, and enabling Speedbox to hold water or ice, if needed.

  • Stabilizing Tethers

    Stabilizing Tethers

    A 3/8-inch rope handle with cushioned grip is standard on each Speedbox. Great for hauling, it also doubles as a secure interlock between units, providing maximum stability in transit—on a pallet, jinga truck, or rotary wing A/C.

  • Ratchet Strap Slots

    Ratchet Strap Slots

    At the front and back of each Speedbox are slots that receive ratchet straps and allow unobstructed access to contents of units even while straps are fastened in place.

  • Heavy-Duty, Hinged Lid

    Heavy-Duty, Hinged Lid

    The lid is double-walled for strength and durability. Its reverse-cup design applies geometry to the underside for extra strength and creates an air cavity for insulation. A built-in gasket provides an air/water-tight seal.

  • Heavy-Duty, Compression Latches

    Heavy-Duty, Compression Latches

    One is none and two is one. Two compression latches back up the main T-handle lock and ensure a good seal between the body and the lid. Kit in. Water out.

  • Get it there fast and over any terrain, with one Speedbox in each hand.

    Get it there fast and over any terrain, with one Speedbox in each hand.

  • Stackable, interlocking Speedbox containers withstand deployments and take the hassle out of 463-L palletizing.

    Stackable, interlocking Speedbox containers withstand deployments and take the hassle out of 463-L palletizing.

  • Standard 463-L cargo nets engage with Speedbox insets for a stable and secure load.

    Standard 463-L cargo nets engage with Speedbox insets for a stable and secure load.

  • Toss it in or carefully pack, then slam the lid and lock it down for secure, wind and water proof protection.

    Toss it in or carefully pack, then slam the lid and lock it down for secure, wind and water proof protection.

  • Never-fail handle system is ergonomically engineered for ease of load in pulling up to 300 lbs. on no-flat, off-road tires.

    Never-fail handle system is ergonomically engineered for ease of load in pulling up to 300 lbs. on no-flat, off-road tires.

  • Rope handles with padded grips double as pulls and interlocks between units.

    Rope handles with padded grips double as pulls and interlocks between units.

  • A load-out solution made specifically for you.

    A load-out solution made specifically for you.

  • The American flag is proudly displayed in relief on every Speedbox.

    The American flag is proudly displayed in relief on every Speedbox.

MAXIMUM LOAD-OUT

MAXIMUM LOAD-OUT

A 3x3x4 Speedbox load-out (36 units) yields the maximum allowable workspace of one 463-L pallet within the hold of a C-5, C-17 or C-130 while delivering 496.8-cubic-feet of net-ready container space with a 10,800 lb. load capacity.

FLEXIBLE LOAD-OUT

FLEXIBLE LOAD-OUT

A 3x3x3 Speedbox load-out (27 units) yields a stable base with a container-capacity total of 372.6-cubic-feet for a 8,100-lb. payload on a 463-L pallet, with the added flexibility of loading extra-large or irregular-shaped cargo on top.

FAQ

How much weight can the Speedbox hold?

The Speedbox will hold up to 300 lbs.

Is there a warranty?

Speedbox has a two-year 100% satisfaction guarantee.

Are there price breaks with quantity purchases?

Purchase a 3x3x3 Cube (27 individual Speedboxes) for a standard 463-L pallet and receive a $20.00 discount per box off the singles price. Purchase 3x3x4 Stack (36 individual Speedboxes) and receive a $30.00 per box discount.

Is any assembly required?

Speedboxes are shipped fully assembled and ready for deployment.